Home Made Arduino Car Parking System
 |
| Arduino Car Parking Concept. |
Watch Video
Description:
In this Arduino Tutorial we will learn how the HC-SR04 Ultrasonic Sensor works and how to use it with Buzzer and LED. And this same system can be used as a Car Peking System and other Projects.
Hardware Required:
- Arduino Board - Buy Now From Amazon
- Ultrasonic Sensor HC-SR04 - Buy Now From Amazon
- Buzzer - Buy LED,Buzzer, Resister and Other Component all in one
- LED - Buy LED,Buzzer, Resister and Other Component all in one
- 220ohm Resistor - Buy LED,Buzzer, Resister and Other Component all in one
- Breadboard and Jump Wires - Buy Now From Amazon
Connections:
HC-SR04 Sensor
- The HC-SR04 Ultrasonic Module has 4 pins, Ground, VCC, Trig and Echo. The Ground and the VCC pins of the module needs to be connected to the Ground and the 5 volts pins on the Arduino Board respectively and the trig and echo pins to any Digital I/O pin (i am using 9 for Trig and 10 for Echo) on the Arduino Board.
- The HC-SR04 sensor attach to the Breadboard
- The Sensor VCC connect to the Arduino Board +5V
- The Sensor GND connect to the Arduino Board GND
- The Sensor Trig connect to the Arduino Board Digital I/O 9
- The Sensor Echo connect to the Arduino Board Digital I/O 10
Buzzer and LED
- The Buzzer attach to the Breadboard
- The Buzzer long leg (+) connect to the Arduino Board Digital 11
- The Buzzer short leg (-) connect to the Arduino Board GND
- The LED attach to the Breadboard
- The Resistor connect to the LED long leg (+)
- The Resistor other leg (from LED's long leg) connect to the Arduino Board Digital 13
- The LED short leg (-) connect to the Arduino Board GND
Code
Replace if (safetyDistance <= 5) 5 with your distance more will catch from more distance.
